Plaster of Paris Production for Gypsum Powder Production Line

• Customization: Available
• After-sales Service: After-Sales Service
• Warranty: One Year
• Model NO.: DCIP023
• Certification: ISO 9001:2008
• Control Type: PLC
• Crushing Degree: Ultra-Fine Mill
• Automatic Grade: Automatic
• Service: Engineer Oversea Service
• Automatic Production Line: Assembly
• Production Scope: Product Line
• Fuel: Natural Gas/Oil/Coal
• Transport Package: Seaworthy Packing
• Specification: ISO9001
• Trademark: DCI
• Origin: China
• HS Code: 84742090
• Production Capacity: 4 Sets
• Package Size: 1200.00cm * 233.00cm * 215.00cm
• Package Gross Weight: 25000.000kg

Product Description

Introduction of turnkey project gypsum powder production line in China:

1. Controlling Part: Full Automatic

2. Capacity: Gypsum Powder Plant: 30, 000-300, 000 Tons Per Year

3. Fuel: Coal, Natural Gas, Heavy Oil, Diesel

4. Raw Material:
1)Gypsum Powder Plant:
A)Natural Gypsum Rock. Content of CaSO4@2H2O >80%.
B)Desulfurization Gypsum
C)Phosphoric gypsum

5. Quality Standard:
1)Gypsum Powder Quality Standard: GB/T 9776-2008
Gypsum Powder: 80-200mesh

The Initial Setting Time: Shall Not Be Less Than 3 Minutes,
The Final Setting Time: Shall Not Be More Than 20 Minutes

6. Main Technology
1)Gypsum Powder Plant(Nature Gypsum Rock)
Gypsum Powder Plant(Nature Gypsum Rock)
Gypsum Mine -0-210mm gypsum rock→ Crushing →bucket elevator →silo → Raymond mill →screw conveyor → bucket  elevator →material stablization silo →electronic belt scale →bucket elevator →boiling kiln →bucket elevator →FU chain conveyor →clinker silo →packing
7.Main production equipment introduction
1)Grinding system-Raymond mill, Rots blower
2)Automatic measuring system-electronic belt scale, vibrating feeder 
3)Calcining system- boiling kiln, heat oil conductive furnace
4)Organic heat carrier boiler
5)Aging &packing system-aging silo, bucket elevator
6)Automatic control system-controing box from Schneider, siemens. 

8. Quality Standard:
Gypsum Powder Quality Standard: GB/T 9776-2008
Gypsum Powder: 80-100mesh
Composition: Content of β-CaSO₄·1/2H₂O (mass fraction) in calcined gypsum should be not less than 75%.
The Initial Setting Time: Shall Not Be Less Than 6 Minutes,
The Final Setting Time: Shall Not Be More Than 30 Minutes